Thread Tap Drill Bits


SKU: 39477061-6-pcs


  • The thread drilled by the drill is very reliable. Even if you do not use an electric drill, you can easily screw in the screws just by hand, saving a lot of work time. At the same time, we also prepared three standard metric / imperial / US (SAE) drill bits to meet the needs of users around the world.


  • Sturdy Material
    Made of HSS, enough hardness and sturdy construction make them not easy to break or deform, the surface is coated with titanium to prevent oxidation and not easy to rust, which can serve you for a long time.
  • Metric Thread Drill Bit Size
    There are totally 6 pieces of taps in different sizes, such as M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5, standard 1/4 inch (6.35 mm) hex shank.
  • 3 Standards Drill Bits
    The drill has three standards: Metric, US(SAE), and Imperial to meet the needs of users around the world.
  • Wide Application
    These drill bit sets are suitable for drilling holes in wood, aluminum, iron, plastic and other materials with low hardness, the thickness of the material to be drilled is within 5 mm, which can save many labors and efforts.
  • Easy To Use
    Fast replacement composite cone by using drill edged principle; Drilling and tapping in one, one-step processing, which can help to save processing steps and time, also help to make your work more efficient.


  • High-speed steel(HSS )
  • 90G
  • M3x0.5: 55 × 24 × 2.5MM
  • M4x0.7: 54 × 24 × 3.3MM
  • M5x0.8: 58 × 28 × 4.2MM
  • M6x1: 58 × 28 × 5MM
  • M8x1.25: 59 × 18 × 6.8MM
  • M10x1.5: 59 × 20 × 8.5MM
  • Thread Tap Drill Bits × 6


  • Due to manual measurements, please allow slight measurement deviations.


There are no reviews yet.

Be the first to review “Thread Tap Drill Bits”

Your email address will not be published.